Aggregate estimator calculator
Aggregate estimator calculator

Use our quantity estimator to help you work out the amount, in both imperial or metric units, of aggregate required for a specific construction or landscaping project.

  • required field
  • required field
  • required field
  • Area: 0 m2
  • required field

Tonnes Required: 0

required field Required fields

    The following error(s) have been found:

Disclaimer
The results from this aggregate quantity calculator should only be used a rough guide as exact conversions will depend on a number of factors that are beyond Longcliffe's control. These vary from moisture contents and method/degree of compaction to type of sub-base in use etc. Longcliffe cannot be held contractually responsible for any surplus or shortfall found on site. If in doubt speak to your Longcliffe representative who can advise on individual requirements.

Limestone rock - a source of high purity calcium carbonate
Limestone rock - a source of high purity calcium carbonate

Our Products

superlon ground calcium carbonateSuperlon | Fine GCC
Fine, high purity ground calcium carbonate powders

longcal granular calcium carbonateLongcal | Granular GCC
High purity granular calcium carbonates

specialty products calcium oxide hydroxideSpeciality Products
Refox CaO, Hydralon Ca(OH)2, Fluromag MgO

ground agricultural limeAgricultural Lime
Limestone and dolomite for agricultural liming

dimensional stoneLandscaping Stone
Architectural, rockery and walling stone

longcliffe limestone aggregatesLongcliffe Aggregates
Clean, evently graded limestone aggregates

golconda dolomite aggregatesGolconda Aggregates
Decorative dolomite aggregates and grits

Aggregate Quantity Estimator Tool Limestone uses chart

Golconda Aggregates

Buff-coloured, dolomite aggregates produced from very high purity Carboniferous Dolomite.

Product Overview

The Golconda range of dolomite aggregates are produced from very high purity Carboniferous Dolomite at the company's Ryder Point quarry and processing operations in Derbyshire. The material has been crushed and screened to produce products of exceptional purity and consistency available in a variety of sizes.

Applications of Golconda Aggregates

Golconda Aggregates Properties and Benefits

The typical physical properties of Golconda Aggregates are as follows:

Appearance buff coloured aggregate
Calcium Oxide (%) 31.5
Magnesium Oxide (%) 20.5 min
Moisture (%) 2
Available Grades/Sizes 3mm 75mm
Clean, evenly graded aggregates

As the material is derived from a natural source its colour may vary. For further information please consult the relevant technical data sheet.

Golconda Aggregates Grades

Golconda Aggregates are available in a wide range sizes ranging from 3mm to 75mm, including grades that comply with British Standard specifications BS EN 12620 (Aggregates for concrete) and BS EN 13242 (Aggregates for use in civil engineering work and road construction).

Our operations are fully accredited to ISO 9001 and ISO 14001. Datasheets and SDS on specific grades are available on request. Please contact us for further information.

Packaging

Golconda Aggregates are supplied in bulk

REACH

Dolomite (CAS: 16389-88-1 & EINECS: 240-440-2) is exempt from the obligation to pre-register under the REACH legislation. The exemption is granted in Annex V, Paragraph 7 as the material is a naturally occurring mineral found in nature.

Natural Chemistry...Pure Science

Home  |  Find Us  |  Contact  |  Links  |  Legal  |  Privacy